Other Products

Flywheels

We produce two sizes of turned brass flywheel to fit our units, all of which are available separately. The 22.0 mm flywheel is only available with a 2mm bore and fits the JH, Mashima and Canon motors. The 28.5 mm flywheel is available with a 2 mm bore, fitting the JH motor, or 2.5mm and 3 mm bores, fitting the appropriate version of the Crailcrest motor. These flywheels can also be used with any other motor with an armature shaft with the appropriate bore.

flywheels - image 13

flywheels - image 13

Price (£)   P&P (£)
 
Flywheels 22.0mm diameter and 2.0mm bore 6.50 2.00
Flywheels Lightweight 22mm dia., 2.0mm bore 7.50 2.00
Flywheels 28.5mm diameter and 2.0mm bore 5.50 2.00
Flywheels 28.5mm diameter and 2.5mm bore 5.50 2.00
Flywheels 28.5mm diameter and 3.0mm bore 5.50 2.00

 

Coach Wheels

Plain steel and Mansell types of 3’ 7” turned steel coach finescale wheel are available fitted to 3/16" axles for either coaches or non passenger carrying stock. Each axle comes with two brass top hat bearings and will fit all vehicles with outside bearings without modification. The wheels can also be adapted for use with inside bearings. The Mansell wheels are supplied with the whitemetal inset already fitted.

Coach wheels - image 14

Coach wheels - image 14

Price (£) P&P (£)
3’ 7” Mansell wheels with whitemetal inserts including bearings – per axle 4.50 4.00

 

Couplings

Two types of coupling are available and are supplied as pairs.

A single link coupling made of pressed steel, fitted to the vehicle body by a single screw/bolt (not supplied). It is similar in design to those used on tinplate models, and can assist in preventing buffer locking when long wheel based vehicles are pushed.

A lost wax brass casting sprue which makes into a screw link coupling set and requires self assembly. Fitting is done through the coupling pocket of the vehicle; springs and split pins are supplied.

Single link couplings - image 15

Single link couplings - image 15

Screw couplings -image 16

Screw couplings -image 16

We can also supply an uncoupler device, made of brass and nickel silver, that can assist in coupling and uncoupling vehicles.  Its overall length is 123 mm.

uncoupler - image 17

uncoupler - image 17

Price (£) P&P (£)
Single link coach/wagon coupling (pr) 6.00 2.00
Screw Link couplings (pr) 6.50 2.00
Uncoupler 3.50 2.00

 

Storage Boxes

We supply three sizes of strong card boxes that are suitable for storing the appropriate size locomotive, coach or wagon.  It should be noted that some very large tender locomotives will not fit in the large box with their tender eg. The Southern Railway “Lord Nelson” class, so separate boxes may be required for the locomotive and tender.

Due to their bulk, we do not normally send these items by mail order, but always have stock at exhibitions.  Should a number of boxes be required at an exhibition the customer is attending, a call to us beforehand would be appreciated so that we can prepare the order prior to delivery at the show. The internal dimensions (nominal) of the three sizes of storage box are as follows:

storage boxes - image 19

storage boxes - image 19

Small 171 mm (L) x 90 mm (W) x 100 mm (H)
Medium 272 mm (L) x 90 mm (W) x 100 mm (H)
Medium Plus 400 mm (L) x 90 mm (W) x 100 mm (H)
Large 480 mm (L) x 90 mm (W) x 100 mm (H)
Price (£)
Robust Storage Boxes (made from thick card) (Exhibitions only) Small 5.00
Medium 7.00
Medium Plus 7.50
Large 8.00